|
There are several advantages to building your own computer.
Probably the most important is that you can customize your pc to
fit your exact needs, rather than having to buy a pre-assembled
pc and then make changes. Understanding how your computer is put
together will help you if you need to make repairs or add new
components at a later time. Building your own computer allows
you to make the decisions on what type of components are used in
putting the computer together to assure high quality materials
are included.
There are eight basic steps to build your own computer.
Step 1 - Design
Decide what specific needs you have for the computer and make a
list of components. Research hardware and software needed to
provide for the determined needs. Decide if you are going to use
reconditioned or used components or buy new. Test all used
components. Most parts over five years old are not worth using,
as they may be incompatible with newer parts.
Step 2 -Setting up a workspace
Find a clean, dry, bright and dust free workspace. Avoid work
areas that have carpet as this can lead to problems with static.
Collect the basic tools needed such as screwdrivers and pliers.
At the very least use an antistatic wrist strap when building
your own computer. It would be even better if an anti-static mat
were placed on the floor of the work area.
Step 3 - Getting Started
Remove the cover from the computer case. Mount the feet, power
supply and cooling fan using the screws provided. Prepare the
motherboard for installation by attaching the standoffs to the
removable plate on the cover. If the cover does not have a
removable plate the rest of the components will need to be
installed first. Screws should be tightened just enough to be
snug and keep the motherboard in place, but not overly tightened.
Step 4 - Start configuring
Configure your motherboard using the product manual settings.
Install the CPU, memory and heat sink or cooler. As with all
components follow manufacturers recommendations for settings and
installation.
Step 5 - Power
With the motherboard in place begin by attaching the large power
cable from the power supply to the motherboard. Attach the
smaller power cords to the LED and other components. Attach the
flat ribbon looking drive cables to the motherboard.
Step 6 - Installing the Drives
Configure the hard drive, CD-ROM drive, DVD or floppy drive
using manufactures specifications. Ensure the setting for
"master" and "slave" is correct. Physically mount the drives to
the front of the cover. Ensure power is hooked up correctly to
the drives; attach drive cables to the devices.
Step 7 - Operating System
Determine which operating system works best for your needs.
Install the operating system Set up a security system for your
computer.
Step 8 - Enjoy
Relax, sit back, and enjoy your new computer. Feel proud that
you were able to build your own computer to meet your exact
needs.
About the author:
On http://www.build-computerz
.com/ you will find articles on build your custom
computers and make your own computers.
|
